Login Search Language Masterclasses List

Indonesian Mango B&S, Spruce top, Da Vinci Model Concert Classical Guitar

Customizable Specifications
- Spalted Mango B&S
- Italian Spruce Top
- Case included (Options Available)
- Lute Type Soundhole
- Carbon Fiber Truss Rod
- Scale 660-615mm (Customizable)
- Handmade Marquetry
- Limited Edition
- Stunning Figure
- Triple neck Reinforcement & Decoration
- Maple Bindings
- Gold Plated Tuners
- Da Vinci Series
- Pearl details throughout
- Hauser (Customizable)
- Paraguayan Cedar Neck
- Gold Plated Tuners

Indonesian Mango B&S, Spruce top, Da Vinci Model

Indonesian Mango B&S, Da Vinci Model IM-S-1

This amazing Indonesian Spalted Mango Guitar is perhaps one of Bellucci Guitars most stunning instruments to date. It was commissioned by my father-in-law, Caía, as a present for his wife Maria Luisa (Tita) on their 60th Wedding Anniversary. I strived at uniting each part with the contiguous one in order to achieve beauty, harmony and a thing of beauty to rest your eyes for long stretches of time. I had never used Mango before this built, and I must say that I am to say the least stunned. The sound it puts out is simply amazing. The whole instrument vibrated generously and the voices fell precisely when the interpreter expects the to fall. S.D.G.

-Finest Woods Selection

-Further Customizable

-Worldwide Shipping

Guitarist Renato Bellucci

See and hear this guitar model

USD 4,990Add to Cart

2Checkout.com secure online payments.

Worldwide Shipping !

Add Extras

Add/remove extra

1- Position markers:

Add/remove extra Diamond mark: 3, 5, 7, 9, 12, 15, 17, 19 — 600.00

Diamond mark: 3, 5, 7, 9, 12, 15, 17, 19 — 600.00

2- Construction of the top:

Add/remove extra Barbero (Flamenco) — 450.00

Barbero (Flamenco) — 450.00

3- Right handed - Left handed

Add/remove extra Left Handed (Left Hand Plucks) — 0.00

Left Handed (Left Hand Plucks) — 0.00

4- Number of frets:

Add/remove extra Acoustic Configuration — 140.00

Acoustic Configuration — 140.00

5- Scale (fret spacing)

Add/remove extra
6- 4-band equalizer / digital tuner
$ 490.00

Add/remove extra
7- Guitar humidifier
$ 50.00

Add/remove extra 615 (Small Hands, AMAZINGLY Comfortable) — 120.00

615 (Small Hands, AMAZINGLY Comfortable) — 120.00

8- Nut and Saddle

Add/remove extra Buffalo Horn — 66

Buffalo Horn — 66

9- Radiused Fingerboard

Add/remove extra
10- Insurance
$ 79.00

Add/remove extra
11- Violin tie
$ 220.00

Add/remove extra 20 in. Radius — 140.00

20 in. Radius — 140.00

12- Number of frets:

Add/remove extra
13- Elevated Fingerboard
$ 490.00

Add/remove extra
14- Velvet cover
$ 99.00

Add/remove extra Acoustic Configuration — 140.00

Acoustic Configuration — 140.00

15- Guitar shape:

Add/remove extra Florentine Cutaway — 434.00

Florentine Cutaway — 434.00

16- Type of finish

Add/remove extra
17- Custom Measures (Submit by m@il)
$ 380.00

Add/remove extra
18- Adjustable Steel Truss Rod (Double Action)
$ 499.00

Add/remove extra
19- Pearl & Ebony Tuners' Buttons
$ 305.00

Add/remove extra French Polish Top, Matte Finish B&S — 450.00

French Polish Top, Matte Finish B&S — 450.00

20- Professional Cases

Bellucci guitars are decorated using marvelous wood marquetry to enhance all her lines and put an accent on specific parts of the construction. The marquetry requires anywhere between 35 & 90 hours of highly skilled labor to be inlayed throughout the guitar. It is made entirely by hand using knives that each luthier typically manufactures himself. It takes the guitar to unsuspected levels of beauty. The marquetry also constitutes an often critical point of release of tension which is caused by the constant expanding and contracting of the woods used in guitar construction. These are due to such factors such as humidity and ambience temperature.
The 9-braces Hauser fan is the result of many years of experimenting. It is based on Torres 4 fan brace design which was later developed by the German luthier Hermann Hauser. The braces act as sound vibrations highways. They carry the vibration of each string to a specific spot on the soundboard. The variations on the 9 braces fan is enormous. The Luthier taylors each fan to achieve a specific sound and match the instrument with the rest of the woods used in the construction. I often use a mixture of Cedar, Spruce and Mahogany to achieve the best separation of voices. When I add the extra transversal strut in the Rodriguez style, it enhances the sound of treble string enormously.
The Ultralight Travel Case Ideal for Shipping (Included) is a very sturdy and extremely light case that protects the guitar very well while allowing the player to carry the instrument without adding more weight than strictly necessary. It is covered in black plush inside and has 2 pockets on the outside and an accessories compartment on the inside. 2 Straps to carry it on the back as a backpack or over the shoulder.
Some Sets for either the Back and Sides, for the Top or both can be quite stunning and rare when it comes to the figure and grain that they display. It is as if nature, knowing the final destiny of its creature, "prepared" the wood in such a way that its grain, hidden to the human eye and to the world, silently develops a breathtaking beauty that comes to life when the dead tree is sawn. Getting the same identical figure is practically speaking impossible but I strive at getting figured wood that resembles and transmits the same vital impression as the one here depicted
Carbon Fiber is stronger than an equivalent volume of steel. The Carbon fiber truss rod prevents neck twisting and/or bending due to the excessive tension that many modern brands of strings bring about. It adds practically no weight to the construction and will keep your neck straight for ages.
The Bellucci Limited Edition logo and label will be assigned to guitars I build using extremely rare and amazingly figured woods in the construction for both the back and sides and/or the top. These sets are selected among hundreds of sets and their price is significantly higher that the standard figured counterparts. 7 of the world best "wood hunters" all the way from South East Asia, Oceania, Africa and the Americas are constantly on the lookout to provide me with some amazing sets for the Limited Edition series.
The Mother of Pearl and Abalone inlay work adds amazing beauty to an already stunning guitar. It takes innumerable hours and very specialized hands and tools to create each inlay work. The average number of hours invested is approximately 150 hours.
The armrest prevents the forearm to interfere with the vibration of the top thus adding a few extra decibels to the instrument. Plus it looks great !
The Bellucci Triple Neck Reinforcement (Maple-Rosewood-Maple) adds beauty and resilience to the neck allowing us to build it slim and when coupled to the Carbon Fiber Truss rod or the Adjustable Truss Rod, it ensures a beautiful and straight neck for several generations no matter what string tension or brand you use.
The Lute type sound hole is not merely an aesthetically element of guitar construction but also closely related with sound production and acoustics in general. The lute type sound hole forces the air inside the guitar to excite the surrounding woods longer than the conventional sound hole, thus generating an overall fuller and more powerful sound.
Papua Abalone Linings add a touch of finesse to the lines of a guitar that it is almost unconceivable that not all guitars wear them. he only reason is perhaps that it takes over 4 days of intensive labor to make
The Da Vinci Series is inspired by the great Tuscan Renascence man Leonardo Da Vinci. He was from the small town of "Vinci" and "Da Vinci" means "from Vinci". The Bellucci Da Vinci Series incorporates some genial add ons to the traditional guitar construction like special bracing in all its variations using a vast array of woods for the fan and Nomex for the Doubletop and a special Lute Type rosette which is the Signature feature and the sound ports strategically located for an involving sound.
The Mother of Pearl and Abalone inlay work adds amazing beauty to an already stunning guitar. It takes innumerable hours and very specialized hands and tools to create each inlay work. The average number of hours invested is approximately 150 hours.